YongXiang Pneumatic 8-row Seeder with Hopper Capacity 75 Liters
Pneumatic seeders with 8 seed tubes, rows from 1 to 8 (the design allows for the ability to quickly change the number of outputs used) and a 75 liter hopper are ideal for sowing and fertilizing in small areas. One unit is equipped with different sowing shafts for sowing different crops: rice,barley, rye, wheat, vetch, lupine, sweet clover, mustard, rapeseed, sorghum,silage maize,oilseed radish, green manure plants - buckwheat, phacelia, and the application of fertilizers and insecticides.
Thanks to a controller, radar or GPS for determining speed, a sensor for monitoring the fullness of the bunker, a dosing shaft with variable rotation speed, the seeded material enters the chamber, where the air flow from a powerful fan carries it into the seed tubes to the bumper plates or metal outlets, from where it is evenly distributed at the surface of the earth. This ensures precise seeding and/or fertilization in strong winds.
Recommended for use for small and medium-sized farms.
- Sowing most crops (barley, rye, wheat, vetch, lupine, sweet clover, mustard, rapeseed, oilseed radish, green manure plants - buckwheat, phacelia) and applying fertilizers in a broadcast or row manner. - Accurate dosing is ensured by a powerful turbine, a reliable drive of the sowing shaft with variable speed, and an algorithm for processing data from sensors. - Installation options: no restrictions. For cultivators, seeders, and tractor attachments. - Large and bright console screen with thoughtful settings and data display, easy setup, quick and convenient calibration test using our application. - Ideal for mounting on narrow tillage implements for use in the garden, on blueberry, blueberry, raspberry, gooseberry, blackberry and currant plantations. - Minimum space requirements for transportation and installation. - Easy installation.
Design features
75L polyethylene hopper, row range: 1 to 8 outlets (optional) Intelligent tablet app accurately controls seeding volume. Adjustable seeding rate from 1 to 300 kg/ha. Equipped with dual 12 V electric air blower(s). The shaft roller is driven by a stepper motor. The air flow evenly delivers the seeds into flexible plastic hoses. Radar control synchronizes tractor speed and seed rate for uniform material application regardless of tractor speed. Multiple seeding rollers (optional), low tank level sensor alarm. Rugged design, easy to operate and install on most implements. Size: 70x42x82 cm Weight: 50 kg Working width: 1-6 m.
Advantages
- Sowing most crops (barley, rye, wheat, vetch, lupine, sweet clover, mustard, rapeseed, oilseed radish, green manure plants - buckwheat, phacelia) and applying fertilizers in a broadcast or row manner. - Accurate dosing is ensured by a powerful turbine, a reliable drive of the sowing shaft with variable speed, and an algorithm for processing data from sensors. - Installation options: no restrictions. For cultivators, seeders, and tractor attachments. - Large and bright console screen with thoughtful settings and data display, easy setup, quick and convenient calibration test using our application. - Ideal for mounting on narrow tillage implements for use in the garden, on blueberry, blueberry, raspberry, gooseberry, blackberry and currant plantations. - Minimum space requirements for transportation and installation. - Easy installation.
Design features
75L polyethylene hopper, row range: 1 to 8 outlets (optional) Intelligent tablet app accurately controls seeding volume. Adjustable seeding rate from 1 to 300 kg/ha. Equipped with dual 12 V electric air blower(s). The shaft roller is driven by a stepper motor. The air flow evenly delivers the seeds into flexible plastic hoses. Radar control synchronizes tractor speed and seed rate for uniform material application regardless of tractor speed. Multiple seeding rollers (optional), low tank level sensor alarm. Rugged design, easy to operate and install on most implements. Size: 70x42x82 cm Weight: 50 kg Working width: 1-6 m.
Standard equipment
·10" control console ·30 m seed lines. ·Standard seeding shaft for small seeds. ·Cable for connecting to the battery. ·Calibration kit, electronic scales for weighing seeds. ·Radar for determining speed.
Seed dosing mechanism (seeding shaft)
YongXiang seeders use different metering shafts for different types of green manure and other applied material. Correct selection of the shaft ensures accurate seeding dosage. This is extremely important when using low seeding rates and small seed sizes. Replacing the sowing shaft for various green manures, such as phacelia, lupine, mustard, alfalfa, radish, etc., is carried out without the use of tools.
Application management console (tablet)
The large and contrasting 10-inch console allows the operator to monitor and adjust key planting parameters in any lighting conditions. Simple operation, calibration, emptying of remaining material, monitoring the seed level in the hopper in real time.
Control system and drive
The exact amount of seed applied is ensured by a correctly selected shaft, precise synchronization of the speed of the metering shaft and the desired value of the seeding rate.
The YongXiang seeder is equipped with a 12V stepless electric motor, which is continuously monitored and adjusted by the central control system to continuously ensure a constant seeding rate.
Electric fan (blower)
Two 12V electric fans create a powerful air flow that instantly transports seeds through the seed tubes to the baffles or pipe tubes, ensuring an even supply of seeds. The fans are protected by an air intake mesh that prevents the entry of straw and debris.
Radar sensor for measuring the speed of the seeder
YongXiang seed drills are equipped with a radar sensor that measures the forward speed and transmits the exact speed to the control console. This ensures synchronized material flow (seeding shaft rotation speed) regardless of whether you are slowing down or speeding up.
Agitator and seed level sensor
The seed tedder is installed directly above the spool shaft to avoid seed caking and ensure a continuous and gentle seed flow. There is a level sensor at the bottom of the hopper. This allows you to control and timely receive information about the need to load the bunker.
Independent locking and opening of outlets
The seeder is equipped with a specially designed L-shaped plug, with which you can plug the seed tubes if necessary. When the long part of the plug is inserted into the seeder, the corresponding outlet hole is blocked and the seeds do not flow through the hole into the chamber. Otherwise, when the short part of the plug is inserted into the seeder, the corresponding hole will open and the seeds will flow again.Having a seeder with 8 outputs, it is quite easy to get a unit with 3, 4...7 outputs, depending on the working width of the implement.
GPS Positioning Chip
Locate the position of the seeder and watch the sowing situation remotely in real time
Camera
Monitor the seeding process in real time on the console.
Seed tube clogging sensors
We came to the conclusion that without sensors for clogging of the seed tubes it is impossible to organize continuous, skip-free sowing. They are therefore included as standard on every seed drill. Information about clogging of the seed tube is displayed on the console.
Broadcast (fan) or row sowing
The seeder ensures uniform distribution of seeds regardless of wind conditions. The standard equipment of the seeder includes 8 or 12 partitions with U-shaped brackets (bumpers), which are used for fan sowing. When sowing in rows (optional), instead of bumpers, metal outlets in the form of tubes are installed at the end of the seed tubes.
Standard equipment
·10" control console ·30 m seed lines. ·Standard seeding shaft for small seeds. ·Cable for connecting to the battery. ·Calibration kit, electronic scales for weighing seeds. ·Radar for determining speed.
Seed dosing mechanism (seeding shaft)
YongXiang seeders use different metering shafts for different types of green manure and other applied material. Correct selection of the shaft ensures accurate seeding dosage. This is extremely important when using low seeding rates and small seed sizes. Replacing the sowing shaft for various green manures, such as phacelia, lupine, mustard, alfalfa, radish, etc., is carried out without the use of tools.
Application management console (tablet)
The large and contrasting 10-inch console allows the operator to monitor and adjust key planting parameters in any lighting conditions. Simple operation, calibration, emptying of remaining material, monitoring the seed level in the hopper in real time.
Control system and drive
The exact amount of seed applied is ensured by a correctly selected shaft, precise synchronization of the speed of the metering shaft and the desired value of the seeding rate.
The YongXiang seeder is equipped with a 12V stepless electric motor, which is continuously monitored and adjusted by the central control system to continuously ensure a constant seeding rate.
Electric fan (blower)
Two 12V electric fans create a powerful air flow that instantly transports seeds through the seed tubes to the baffles or pipe tubes, ensuring an even supply of seeds. The fans are protected by an air intake mesh that prevents the entry of straw and debris.
Radar sensor for measuring the speed of the seeder
YongXiang seed drills are equipped with a radar sensor that measures the forward speed and transmits the exact speed to the control console. This ensures synchronized material flow (seeding shaft rotation speed) regardless of whether you are slowing down or speeding up.
Agitator and seed level sensor
The seed tedder is installed directly above the spool shaft to avoid seed caking and ensure a continuous and gentle seed flow. There is a level sensor at the bottom of the hopper. This allows you to control and timely receive information about the need to load the bunker.
Independent locking and opening of outlets
The seeder is equipped with a specially designed L-shaped plug, with which you can plug the seed tubes if necessary. When the long part of the plug is inserted into the seeder, the corresponding outlet hole is blocked and the seeds do not flow through the hole into the chamber. Otherwise, when the short part of the plug is inserted into the seeder, the corresponding hole will open and the seeds will flow again.Having a seeder with 8 outputs, it is quite easy to get a unit with 3, 4...7 outputs, depending on the working width of the implement.
GPS Positioning Chip
Locate the position of the seeder and watch the sowing situation remotely in real time
Camera
Monitor the seeding process in real time on the console.
Seed tube clogging sensors
We came to the conclusion that without sensors for clogging of the seed tubes it is impossible to organize continuous, skip-free sowing. They are therefore included as standard on every seed drill. Information about clogging of the seed tube is displayed on the console.
Broadcast (fan) or row sowing
The seeder ensures uniform distribution of seeds regardless of wind conditions. The standard equipment of the seeder includes 8 or 12 partitions with U-shaped brackets (bumpers), which are used for fan sowing. When sowing in rows (optional), instead of bumpers, metal outlets in the form of tubes are installed at the end of the seed tubes.
Volume - 75 l. Size: 70x42x82 cm. Weight: 50 kg. Working width: 1-6 m. Rows: from 1 to 8 outlets (optional). Adjustable seeding rate from 1 to 300 kg/ha. Equipped with dual 12 V electric air blower(s). The shaft roller is driven by a stepper motor. The air flow evenly delivers the seeds into flexible plastic hoses. Radar control synchronizes tractor speed and seed rate for uniform material application regardless of tractor speed. Multiple seeding shafts (optional), low tank level sensor alarm. Rugged design, easy to operate and install on most implements.
Volume - 75 l. Size: 70x42x82 cm. Weight: 50 kg. Working width: 1-6 m. Rows: from 1 to 8 outlets (optional). Adjustable seeding rate from 1 to 300 kg/ha. Equipped with dual 12 V electric air blower(s). The shaft roller is driven by a stepper motor. The air flow evenly delivers the seeds into flexible plastic hoses. Radar control synchronizes tractor speed and seed rate for uniform material application regardless of tractor speed. Multiple seeding shafts (optional), low tank level sensor alarm. Rugged design, easy to operate and install on most implements.
